Other - Vevor Flm-R30-Ft Mode D'emploi

the appointed port
Pulse Mode: Checking this option means the soft receive the start signal as pulse mode,
otherwise it is as level mode.

10.4.4 Other

Starting Mark Delay: The delay before marking.
Finish Mark Delay: The delay after marking
Max. Power Delay: The Max dealy when the laser power is changed from 0% to 100%
during marking. When the power's range is changed less then 100% during marking, the time is
less proportional to the Max vaule. This function is suit for the laser power supply with slow
response speed. If the laser power supply's response speed is very quick, this value may be 0 ms.
Max. Freq Delay: Same as max power delay
Show start mark dialog: Every time inquired whether mark it before the marking
Figure 10-31 Other Parameter Dialog Box
EzCad2UNI User's Manual
137
All rights reserved