VEVOR FLM-R30-FT Mode D'emploi page 19

•Installation Dimensions (Top View):mm
•The location should be stable, level, dry, and climate controlled to ensure an ambient
temperature 40℉–95℉ (5℃–35℃) and an ambient humidity under 70%. In particular, the
temperature and humidity together should not be close to the dew point. It is recommended to use a
windowless room or to use blinds and/or curtains to avoid exposure to the potential additional heat
of direct sunlight.
•The location should be free of dust and other airborne pollutants and well ventilated enough to
process any fumes produced by the engraving process in accordance with all applicable laws and
regulations. Depending on the materials to be processed, this may require construction of a
dedicated ventilation system.
•It should be away from children; combustible, flammable, explosive, or corrosive materials;
and sensitive EMI devices.
•The power cord should be plugged into a compatible and stable power source via a grounded
3-prong outlet. No other item should be drawing current from the same fuse.
•There should be fire-fighting equipment nearby and the local fire station's phone number
should be clearly displayed.
•It is highly recommended to have an extra work table nearby in order to avoid placing objects
on or directly adjacent to the machine, which could become a fire or laser hazard.
17