VEVOR FLM-R30-FT Mode D'emploi page 11

Power Buttons
A. Emergency Stop - Stops the machine instantly by pressing the button during operation;
turning it clockwise releases the button. Due to risks of fire and other hazards during engraving, this
engraver includes a large and easy-to-reach emergency stop button on the control panel.
B. Scan Head - Activates the mainboard and the scanning galvo lens. Insert your key and turn it
clockwise after releasing the emergency stop during normal startup.
C. Fiber Laser - Activates the 24V relay inside the main tower that connects the power to the
fiber laser source. Press it after the emergency stop button during normal startup. Press it to restore
the power after a blackout.
D. Focus Switch - Activates the red light guider to assist the focusing and engraving process.
9