Chapter 7 Special; Change Text; Ipg Setting - Vevor Flm-R30-Ft Mode D'emploi

7.1 Change text

Click change text, follow dialog window will pop-up, as fig 7-1.
The content under 'text' is to be replaced, the content under 'change to' is that after
replace. Fig 7-2b is the result after operate fig 7-2a as the method in fig 7-1.
Fig 7-2a content before replace
The name of the text is replaced, but the content of the text is not changed.

7.2 IPG Setting

Click IPG Setting in ' special' menu, the follow dialog will pop-up, Fig.7-3. It connects
computer and laser through serial line for series of IPGM laser, and the laser can send the status
signal of themselves to the software, like temperature, power state.

Chapter 7 Special

Fig 7-1 change text interface
Fig 7-2b content after replace
89