FONESTAR NMX SYSTEM Guide De Démarrage Rapide page 49

LOAD CONFIGURATION IN NMX-WP PANELS FROM FILE
Note that each NMX-WP panel can only perform actions on the inputs and outputs of 1 single matrix. Each
matrix can have several associated wall panels. In addition, when the file is loaded, all previously loaded
items will be removed from the screen and only those in the file will appear.
1.- In the PC software, go to the SETTINGS > PANEL SETTINGS menu and a new window will appear.
2.- Open the file by clicking on the
3.- Carefully check that all computers loaded in the central pane of the window have the correct IP
addresses.
4.- Finally, click on the button
finished. In a new window a % bar will indicate the progress of the upload and the window will close
when the upload is complete.
button (OPEN FILE).
(UPLOAD TO PANEL) y and wait a few seconds until the process is
- 49 -
EN