FONESTAR NMX SYSTEM Guide De Démarrage Rapide page 28

EN
MATRIX TAB
Displays the input and output channels and the recorder player at the bottom. And at the top, the shortcuts
to the channels, the configuration of each channel and the main parameters of the MATRIX system module
that allows you to assign the inputs to each of the outputs and mix them.
Direct access
to outputs
Routing matrix
This tab is the essential part of the software and allows you to make audio mixes. This matrix has a
dual functionality:
- The main function is to route the input signals to the outputs. Simply by
selecting the intersection of an input and an output we can direct the input
to the output. This intersection will change to blue indicating that the input
channel is correctly assigned to the output.
- It can also be used as an audio mixer. Since it is possible to route 2 or more
inputs to the same output.
In addition, each intersection has an additional balance control. Right-click on
the blue box and a slider will appear with which you can adjust the amount of
input signal.
falta acceso directo a canales
INPUT Channels
cambiar imnagen
OUTPUTS Channels
Player/Recorder
- 28 -