Assigning The Valve Supply - Aventics INTERBUS S Mode D'emploi

82 AVENTICS | INTERBUS S | R412005743–BDL–001–AD
Commissioning and Operation
Table 14: Assignment of the S4, S5, and S6 switches
Switches
S4
S5
S6
S6
7.1.4
The S4, S5 and S6 switches (see Fig. 9) for assigning the valve
supply are located beneath the PG screw cap B (see Fig. 9). The
following is assigned to each switch:
4 subbase positions for double solenoid valves
W
(with solenoids 12 and 14) or
8 subbase positions for single solenoid valves
W
(with solenoid 14).
Fig. 9: S4, S5, and S6 switches for assigning valve supply voltages
(U
This switch allows valves to be assigned in groups to valve
supply voltages U
When delivered, all valves are assigned to the U
Subbase positions for double
solenoid valves (solenoids 12, 14)
0
1
2 9 – 12
2 9 – 12
3 13 – 16
When delivered, switches S4 to S6 are in the U

Assigning the valve supply

, U )
Q1 Q2
and U
Q1 Q2
1 – 4
5 – 8
S4 S5 S6
.
Subbase positions for single
solenoid valves (solenoid 14)
1 – 8
09 – 16
17 – 24
17 – 24
25 – 32
U
Q1
U
Q2
voltage.
Q1
position.
Q1