Safety Instructions Related To The Product And Technology - Aventics INTERBUS S Mode D'emploi

62 AVENTICS | INTERBUS S | R412005743–BDL–001–AD
Safety instructions
To avoid injuries due to unsuitable spare parts, only use
W
accessories and spare parts approved by the manufacturer.
Comply with the technical data and ambient conditions
W
listed in the product documentation.
If unsuitable products are installed or used in safety-relevant
W
applications, this may result in unintended system operating
states that may lead to injuries and/or equipment damage.
Therefore, only use a product in safety-relevant applications if
such use is specifically stated and permitted in the product
documentation.
You may only commission the product if you have determined
W
that the end product (such as a machine or system) in which
the AVENTICS products are installed meets the country-
specific provisions, safety regulations, and standards for the
specific application.
2.6 Safety instructions related to the product
and technology
Do not modify or convert the device.
W
Only use the device within the performance range provided
W
in the technical data.
Do not place any mechanical loads on the device under any
W
circumstances. Do not place any loose objects on it.
This device may only be used for industrial applications
W
(class A). An individual license must be obtained from the
authorities or an inspection center for systems that are to be
used in a residential area (residential, business, and
commercial areas).
Ensure that the power supply is within the stipulated
W
tolerance for the modules.
A 24 V power pack supplies all components with electricity.
W
The power pack must be fitted with a safe isolation in
accordance with EN 60742, VDE 0551 classification. The
corresponding electrical circuits are thus SELV/PELV
circuits in accordance with IEC 60364-4-41.
Switch off the operating voltage before connecting or
W
removing the plugs.