Safety Instructions; About This Section; Intended Use; Improper Use - Aventics INTERBUS S Mode D'emploi

60 AVENTICS | INTERBUS S | R412005743–BDL–001–AD

Safety instructions

2 Safety instructions
2.1

About this section

The product has been manufactured according to the accepted
rules of current technology. Even so, there is risk of injury and
damage to equipment if the following chapter and safety
instructions of this documentation are not followed.
Read these instructions completely before working with the
O
product.
Keep this documentation in a location where it is accessible
O
to all users at all times.
Always include the documentation when you pass the
O
product on to third parties.
2.2

Intended use

The product is an electropneumatic system component.
The product may be used as follows:
only for industrial applications.
W
within the performance limits listed in the technical data.
W
The product is intended for professional use only.
Intended use includes having read and understood this
documentation, especially the chapter "Safety instructions".
2.3

Improper use

Any use other than that described under Intended use is
improper and is not permitted.
If unsuitable products are installed or used in safety-relevant
applications, this may result in unintended system operating states
that could lead to injuries and/or equipment damage. Therefore,
only use a product in safety-relevant applications if such use is
specifically stated and permitted in the product documentation. For