Personnel Qualifications; General Safety Instructions - Aventics PROFINET-IO Mode D'emploi

AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
2.4

Personnel qualifications

The work described in this documentation requires basic
electrical and pneumatic knowledge, as well as knowledge of the
appropriate technical terms. In order to ensure safe use, these
activities may therefore only be carried out by qualified technical
personnel or an instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures, due to
their professional training, knowledge, and experience, as well as
their understanding of the relevant regulations pertaining to the
work to be done. Qualified personnel must observe the rules
relevant to the subject area.
2.5

General safety instructions

W
Observe the regulations for accident prevention and
environmental protection.
W
Observe the safety instructions and regulations of the country
in which the product is used or operated.
W
Only use AVENTICS products that are in perfect working
order.
W
Follow all the instructions on the product.
W
Persons who assemble, operate, disassemble, or maintain
AVENTICS products must not consume any alcohol, drugs,
or pharmaceuticals that may affect their ability to respond.
W
To avoid injuries due to unsuitable spare parts, only use
accessories and spare parts approved by the manufacturer.
W
Comply with the technical data and ambient conditions
listed in the product documentation.
W
If unsuitable products are installed or used in safety-relevant
applications, this may result in unintended system operating
states that may lead to injuries and/or equipment damage.
Therefore, only use a product in safety-relevant applications if
such use is specifically stated and permitted in the product
documentation.
67
Notes on Safety