76
AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
Assembly
Bus coupler
Input/output modules
5
Assembly
5.1
Assembling the valve system
with the bus coupler
You will receive your individually configured valve system
completely fitted with all components:
W
Valve terminal
W
Bus coupler
W
Up to six I/O modules (if needed)
W
Up to three module extensions (if needed)
The operating instructions accompanying the VS describe in full
how to assemble the entire valve system. Any mounting
orientation may be used with the VS. The dimensions of the
complete VS vary according to module equipment.
5.2
Labeling the module
O
Inscribe the address provided/used for the bus coupler
on the bus coupler in the BTN field.
O
Label the connections directly on the labels of the
input/output modules.