Intended Use; Improper Use - Aventics PROFINET-IO Mode D'emploi

66 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
Notes on Safety
2.2

Intended use

The product is an electropneumatic system component.
The product may be used as follows:
W
only for industrial applications (class A). An individual license
must be obtained from the authorities or an inspection center
for systems that are to be used in a residential area
(residential, business, and commercial areas).
W
within the performance limits listed in the technical data.
The product is intended for professional use only.
Intended use includes having read and understood this
documentation, especially the chapter "Notes on Safety".
2.3

Improper use

Any use other than that described under Intended use is
improper and is not permitted.
If unsuitable products are installed or used in safety-relevant
applications, this may result in unintended system operating
states that could lead to injuries and/or equipment damage.
Therefore, only use a product in safety-relevant applications if
such use is specifically stated and permitted in the product
documentation. For example, in areas with explosion protection
or in safety-related components of control systems (functional
safety).
AVENTICS GmbH is not liable for any damages resulting from
improper use. The user alone bears the risks of improper use of
the product.
It is considered improper use when the bus coupler
W
is used for any application not stated in these instructions,
W
is used under operating conditions that deviate from those
described in these instructions or
W
is changed or converted.