Intended Use; Improper Use; Personnel Qualifications - Aventics AS-i Série Mode D'emploi

50 AVENTICS | AS-i | R499050017–BDL–001–AE
For your safety
Keep these instructions in a location where they are
W
accessible to all users at all times.
Always include the operating instructions when you pass
W
the bus coupler on to third parties.
2.1

Intended use

The bus coupler is only intended for industrial applications.
W
Observe the performance limits listed in the technical data.
W
Intended use includes having read and understood these
instructions, especially the chapter "For your safety".
2.2

Improper use

It is considered improper use when the bus coupler
is used for any application not named in these instructions,
W
is used under operating conditions that deviate from those
W
described in these instructions.
The bus products described herein are not safety modules
W
in accordance with EN 61508 and DIN EN 954-1.
2.3

Personnel qualifications

Assembly, disassembly, commissioning, and operation require
basic electrical and pneumatic knowledge, as well as
knowledge of the appropriate technical terms. Assembly,
disassembly, commissioning, and operation may therefore only
be carried out by qualified electrical or pneumatic personnel or
an instructed person under the direction and supervision of
qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant conditions pertaining to