Connecting The Bus Coupler - Aventics AS-i Série Mode D'emploi

AVENTICS | AS-i | R499050017–BDL–001–AE
Faulty wiring
Faulty wiring can lead to malfunctions as well as damage to
the bus system.
Unless otherwise stipulated, comply with the installation
O
guidelines and wiring recommendations in the AS-i
specifications.
Only use cables that meet the field bus specifications as
O
well as the connection speed and length requirements.
In order to assure both the protection class and the
O
required strain relief, the cable and plug assembly
6.3.1

Connecting the bus coupler

Only use the provided plug connectors and an AS-i profile
cable to connect the modules.
Place the bus coupler connection (with the yellow AS-i
O
profile cable) on the PWR connection and tighten.
Observe the maximum power consumption in accordance
with the AS-i specifications.
NOTICE
65
Assembly