Check Sensors On The Input Module - Aventics PROFINET-IO Mode D'emploi

102 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
Commissioning and Operation
6.3.3

Check sensors on the input module

There is one LED per input on the input module for monitoring
purposes. The LED lights up if the signal level is "high".
O
Before commissioning the system, check the sensor
function and method of operation by reading the LEDs.
Fig. 8: LED displays on the M8 input module (left) and M12 (right)
Table 24: LED display on the input modules
LED Color
Input Yellow
Meaning
High signal level mode