Publicité
Dis T.1634007e
Example: in the screen, on the left.
The first line indicates that you are seeing those of July 08, 2020.
The second line shows that, at 15, 12 minutes and 3 seconds
(15:12:03) the sensor no.2 (S 02) has exceeded the threshold of
ALARM 1 (AL 1).
The third line shows that, at 14, 45 minutes and 21 seconds
(14:45:21), the output relay no.5 (U 05) have been activated (ACT.).
The fourth line shows that, at 10, 38 minutes and 57 seconds
(10:38:57) LOGIC INPUT number 1 (I 01) has been deactivated and
returned to NORMAL operation (DEA.).
In the other rows, there are no events.
SETTINGS
In this submenu it is possible to manage the control unit settings.
Scroll the list with
SETTINGS-LANGUAGE (Level 1):
To change the language of the control unit, press
item. With
and
confirmation window will appear. To go back press
confirm. The window will warn that the operation was successful.
Then the screen returns to the beginning of the
management.
SETTINGS-DISPLAY CONTRAST
Press
on the item and then adjust the value with
ENTER
Having obtained the desired effect, pressing
window will appear. Press
window will warn you that the operation was successful. Then the
screen returns to the beginning of the SETTINGS management.
SETTINGS-BUZZER (Level 1)
Choose whether to activate the BUZZER inside the Control unit, if a sensor or zone failure or alarm
occurs. Press
on the item and then, with
ENTER
ALARMS: If set to YES, the internal buzzer of the control unit is
activated if a sensor or a zone enters the Alarm state.
FAULTS: If set to YES, the internal buzzer of the control unit
activates if a sensor or a zone enters a Fault state.
:
SILENCE
if set on YES , the internal buzzer of the control panel is
deactivated and no Bip will be sound when keys are pressed.
To modify these parameters press
value has been chosen, by pressing
confirm or
ESC
to go back. After confirming, the window will warn that the operation was successful.
Then the screen returns to the beginning of the SETTINGS management.
TECNOCONTROL S.r.l. - Via Miglioli, 47 20054 SEGRATE (MI) - Tel. 02. 26 92 28 90 - Fax 02. 21 33 734
CE424P User manual
and
, with
select the desired item.
chooses the desired one, then press
again to confirm or
ENTER
and change the value with
ENTER
the confirmation window will appear. Finally press
ENTER
on the relevant
ENTER
. The
or press
to
ESC
SETTINGS
and
.
the confirmation
to go back. A
and
keys and choose which item to modify.
Pag. 32/52
EVENTS
08/07/2020
15:12:03
S 02 AL1
14:45:21
U 05 ACT.
10:38:57
I 01 DEA.
NO EVENT
NO EVENT
NO EVENT
SETTINGS
1 LANGUAGE
2 CONTRAST
3 BUZZER
4 DATEandTIME
5 MODBUS
6 INFO
LANGUAGE
1 ITALIAN
2 ENGLISH
3 FRENÇH
4 SPANISH
SETTTINGS
SAVED
ADJUST
1 CONTRAST
BUZZER
ALARMS:
NO
FAULTS:
NO
SILENCE
NO
and
. Once the desired
ENTER
14
to
Publicité
