Publicité
Dis T.1634007e
nd
2
row
Shows the name of the detected gas or its formula
Shows the currently measured gas concentration and the unit of measure and current
rd
3
row
value (mA) (current generated by the sensor).
th
4
row
Indicates the Zone.
Indicates the output number (Relay), corresponding respectively to:
st
1
Threshold (AL1)
th
th
5
-6
row
Value 0 (zero) indicates, at that threshold, the output not been assigned, while the
highlighted value indicates that output relay is currently active (Alarm). The values are
real time updated.
Pressing
key it returns to the screen of the sensors. Press
ESC
Screen.
Using the keys
and
the Zones (from Z1 to Z4) and the Logic Input AUX (I1).
The status of a LOGIC INPUT can be configured :
-
LOW (normally open contact) or
-
HIGH (normally closed contact)
it can only be ACTIVE or DEACTIVE,
while a ZONE has the same states as a Sensor, except the Full Scale.
Press
ESC
to enter the Main Menu.
The Control Unit has No. 6 Zones and No.1 Logic Input.
MAIN MENU
The Control Unit is provided with a main menu from which you can
manage all of its functions.
The name of each line indicates the thematic area on which we can take
action, by accessing the corresponding submenus.
Pressing
and
Than press
to enter in the corresponding submenus.
ENTER
The Submenu 2-RESERVED, is not accessible, is not currently enabled,
is reserved for other functions.
Some submenus are protected by Level 1 or Level 2 passwords, indicated by the
"padlock" symbol visible when the level was not enabled.
When a protected menu is selected, the request to enter the specific Password
appears. When a menu is Enabled, all others of the same level will be Enabled and
the "locks" disappear. Further information can be found in the
With
and
you can enter the value, with
can move from one number to another.
After entering the Password, move to OK and press
If the password entered is correct, the window will confirm the operation.
If an incorrect password was entered, the window alerts you of the error
and return to the screen ENTER PASSWORD
The required access level is indicated, when necessary, to the left of the individual items of the
manual.
List and short description of the accessible menus and the required or Password:
Performs silencing or Resetting the alarms and faults, not active and return to
1-RESET
the main menu.
TECNOCONTROL S.r.l. - Via Miglioli, 47 20054 SEGRATE (MI) - Tel. 02. 26 92 28 90 - Fax 02. 21 33 734
CE424P User manual
nd
2
Threshold (AL2)
is displayed, in cyclic mode, the situation of
key to scroll through the menus.
rd
3
Threshold (AL3)
again, to return to the Main
12:00
Z1) NORM.
Z2) - - - -
Z3) - - - -
Z4) - - - -
I1) LOW DEACTIVE
1 RESET
2 REMOTE UNITS
3 SENSORS
4 INPUTS
5 ZONES
6 EVENTS
7 SETTINGS
8 PASSWORD
9 SERVICE
0 SD CARD
Password
and
keys you
.
ENTER
Pag. 18/52
FAULT
FRI
08/07/2020
12:00 fri 08/07/2020
CE424
section.
ENTER PASSWORD
LEVEL 1
0000
OK
Publicité
