Service And Maintenance; Servicing The Module Extensions; Maintaining The Module Extensions - Aventics HF04 Mode D'emploi

92 AVENTICS | CMS, BDC, Stand-Alone | R412008961–BDL–001–AF

Service and maintenance

9. Set the address on the new bus coupler (2, Fig. 17
or 5, Fig. 18) (see operating instructions for the bus
coupler used).
10. Re-establish the electric connections.
9 Service and maintenance
Applied electric voltage and high pressure
Danger of injury from electric shock and sudden
pressure drops.
O Make sure the system is not pressurized or
connected to power before carrying out any service
or maintenance work.

9.1 Servicing the module extensions

Damage to the surface caused by solvents and
aggressive detergents
The surfaces and seals could be damaged by
aggressive solvents and cleaning agents.
O Never use solvents or aggressive detergents.
O
Regularly clean the device with a damp cloth. Only
use water or a mild cleaning agent.

9.2 Maintaining the module extensions

The module extensions of the VS HF03 LG and VS HF04
are maintenance-free.
O
Comply with the maintenance intervals and
specifications for the entire system.
CAUTION
NOTICE