Symbols; Abbreviations Used; For Your Safety; About This Chapter - Aventics HF04 Mode D'emploi

AVENTICS | CMS, BDC, Stand-Alone | R412008961–BDL–001–AF
Table 3: Meaning of the symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or
operated optimally.
O
Individual, independent action
1. Numbered steps:
2.
The numbers indicate sequential steps.
3.

1.3.2 Symbols

The following symbols indicate information that is not
relevant for safety but that assists in comprehending the
documentation.

1.3.3 Abbreviations used

This documentation uses the following abbreviations:
Table 4: Abbreviation
Abbreviation Meaning
VS Valve system
SAS end plate End plate for Stand-Alone system
E end plate End plate with electrical connections
2

For your safety

2.1 About this chapter

The product has been manufactured according to the
accepted rules of safety and current technology. Even so,
there is a risk of injury or damage if the following general
safety instructions and the specific warnings given in this
instruction manual are not observed.
O
Read these instructions completely before working
with the product.
O
Keep these instructions in a location where they are
accessible to all users at all times.
O
Always include the operating instructions when you
pass the product on to third parties.
55
For your safety