Intended Use; Improper Use - Aventics HF04 Mode D'emploi

56 AVENTICS | CMS, BDC, Stand-Alone | R412008961–BDL–001–AF
For your safety

2.2 Intended use

The product is an electropneumatic system component.
The product may be used as follows:
W
only for industrial applications. An individual license
must be obtained from the authorities or an
inspection center for systems that are to be used in a
residential area (residential, business, and
commercial areas).
W
only within the performance range provided in the
technical data.
The product is intended for professional use only.
Intended use includes having read and understood this
documentation, especially the chapter "For your safety".

2.3 Improper use

Any use other than that described under Intended use is
improper and is not permitted.
The installation or use of unsuitable products in safety-
relevant applications can result in unanticipated
operating states in the application that can lead to
personal injury or damage to equipment. Therefore, only
use a product in safety-relevant applications if such use
is specifically stated and permitted in the product
documentation.
AVENTICS GmbH is not liable for any damages resulting
from improper use. The user alone bears the risks of
improper use of the product.
Improper use of the product includes:
W
use for any application not stated in these
instructions,
W
use under operating conditions that deviate from
those described in these instructions.
W
changing or conversion of the product
The module extensions and bus products described here
are not considered safety modules in accordance with
EN 61508 and DIN EN 954-1.