Lancellotti Maestro Série Manuel D'utilisation page 378

FAULT
The hob or the cooking
zones do not switch on.
The display shows the
adjacent symbol.
The display shows the
adjacent symbol.
The display shows the
adjacent code
alternated with
numbers or letters.
The hob or a cooking zone
switches off.
The cooling fan stays on
after the hob is switched off.
378
Instructions for the user
CAUSE
The appliance is not correctly connected to the
mains.
The hob lock function has been activated.
There is no pan on the cooking zone.
The pan is not suitable for magnetic induction
cooking.
The diameter of the base of the pan is too small
for the cooking zone.
The knob is not positioned correctly.
The safety device has triggered. The device
triggers when a cooking zone is left on by mistake.
An empty pan has overheated.
This is not a fault.
REMEDY
Reconnect the appliance to the mains.
Deactivate the lock by following the instructions in
section 11.9
Correctly position a suitable pan by following the
instructions in section 11.5
Replace the pan with a suitable one, as indicated in
section 11.5
Replace the pan with a suitable one, as indicated in
section 11.5
It is not necessary to call Customer Service; to
restore the radiant element, simply return the knob to
position "0" and reset the required power value.
Contact Customer Service and give the code shown
on the display.
Return the relative knob to "0" position.
Remove the empty pan from the cooking zone.
The fan stays on until the hob has cooled down. The
fan will switch off automatically.