Lancellotti Maestro Série Manuel D'utilisation page 351

Instructions for the user
DESCRIPTION OF THE DEEP FRYER KNOB
The knob of the thermostat that controls the temperature of the heating
element can be adjusted between 0° and 200°C. There are also two warning
lights: the green light signals the deep fryer is working; the orange light
switches on while the appliance is heating. When the preset temperature is
reached, the orange light switches off. If the temperature of the oil should
decrease while frying, the appliance automatically begins to heat and the
orange light switches on until the temperature set on the thermostat knob is
reached.
DESCRIPTION OF FRY-TOP / STEAK GRILL AND GRILL KNOB
: is equipped with differentiated heating. The entire
F - /
RY TOP STEAK GRILL
cooking surface can be used, or only one of the two halves, front or rear. The
knobs that regulate the energy individually control the temperature of the two
heating elements. A green light indicates that the appliance is heating.
: two warning lights give essential information on how the appliance is
G
RILL
working. The green light switches on to indicate that the appliance is powered
(ON). A orange light indicates that the heating element is heating up.
LAYOUT OF HEATING ELEMENTS - Description of symbols
REAR
DESCRIPTION OF TIMER KNOB (available only on certain models)
Turn the knob all the way clockwise to wind the timer. It is possible to set the
required time up to a maximum of 60 min. The bell rings briefly when the
preset time has elapsed.
DESCRIPTION OF VITROCERAMIC HOB KNOBS
Besides the normal knobs that regulate the energy, the
vitroceramic hob is equipped with knobs for differentiated
heating. Settings from 1 to 11 control the heating of the
internal element, setting the knob to the symbol
outer element also operates.
LAYOUT OF HEATING ELEMENTS - Description of symbols
REAR LEFT
FRONT LEFT
CENTRAL
FRONT
the
REAR RIGHT
FRONT RIGHT
351