Using The Vitroceramic Hob; General Warnings; Switching On; Switching Off - Lancellotti Maestro Série Manuel D'utilisation

Instructions for the user

10. Using the vitroceramic hob

During normal operations, the appliance heats up considerably. Caution should therefore be used.
Do not allow children to approach the appliance. Do not leave the vitroceramic hob unattended
while it is on.

10.1 General warnings

The first time it is heated, the vitroceramic hob may develop an acrid or burnt smell caused by oily
residue from manufacturing, which disappears completely after repeated use.
The vitroceramic hob has different power consumptions depending on the type of heating element
used. The diagram shows the values of the power consumed.
In the envisaged cases, the first
numeric value refers to the total power,
whereas the value that follows the
symbol "/" refers to the inside diameter,
with the exception of the central heating
element, whose value that follows "/"
refers to the outer diameter.

10.2 Switching on

Position the pan or pot with the food to be cooked inside it on the required heating element.
Turn the energy regulator knob to the required setting. After a few moments, the latent heat light
corresponding to the selected heating element switches on.
If the vitroceramic hob is used to boil water, once it has boiled, turn the energy regulator knob to a
lower setting to prevent the liquid in the pot from boiling over and soiling the surface.
Some knobs are fitted with a supplementary heating setting (griddle with dual heating
element). To activate it, turn the energy regulator knob to position

10.3 Switching off

After cooking, return the knob to position .
The vitroceramic hob features a latent heat light which
reproduces in reduced scale the position of the heating
diameters. This light signals that the surface area is still hot.
Do not clean or touch the surface until the latent heat light has switched off.
.
367