Lancellotti Maestro Série Manuel D'utilisation page 357

Instructions for the user
ADJUSTING THE VOLUME OF THE BELL
The volume of the bell can be varied (on 3 levels) while it is operating by pressing button
DEACTIVATING THE BELL
The bell automatically stops ringing after seven minutes. It is possible to deactivate it manually by
pressing button .
After pressing button
switch knob and the thermostat knob to "0".
It is also possible to deactivate the bell by pressing any one of the function buttons. The oven
switches off regardless of the function or set temperature and the AUTO symbol flashes. To stop
the AUTO symbol flashing, press button
TIMER
The end of cooking display can also be used as a simple timer.
Using the display as a timer does not interrupt the operation of the oven at the end of the set time.
Press button and the display shows the figures
the value variation buttons
display shows symbols
After programming the timer, the display once more shows the current time. To display the time
remaining, press button
Setting inconsistent values is logically prevented (e.g. the end of cooking display does not accept a
contrast between an end of cooking time and a longer cooking time).
DELETING SET DATA
With the program set, hold down the button of the function you wish to delete while at the same
time reaching value
interpreted by the display as the end of the cooking.
MODIFYING SET DATA
The data set for cooking can be modified at any moment by holding down the button of the function
and at the same time pressing the value variation buttons
the oven begins to operate once again: to switch it off, turn the function
, turn the function selector switch and thermostat to "0".
or . Release the button
and .
.
with the value variation buttons
; hold down and press at the same time
to begin the programmed count and the
or . Deleting the cooking time is
or .
.
357