Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
MAINTENANCE AND SERVICING
The Dental Practice must carry out procedures detailed in the "Routine Maintenance" paragraph regularly to ensure
proper use and maintenance of this equipment.
This dental unit, together with its instruments and connector devices (with some exceptions as may be indicated in the
"Scheduled Maintenance" chapter of this manual) must undergo annual scheduled maintenance, independently of their
use. This maintenance is to be performed only by authorised Castellini technicians in possession of valid licenses. The
owner of the device is responsible for contacting the technician.
Three years after turbine installation, general servicing must be carried out at the Castellini S.p.A. headquarters.
Following this general inspection scheduled maintenance must be performed every three years, with the exception of the
aforementioned annual scheduled maintenance.
- Do not remove equipment packaging during transport or storage.
- It is recommended that a test to determine proper operation be performed upon installation, only after the
equipment has reached a room temperature of (10 ÷ 40 °C).
SCRAPPING AND DISPOSAL
This equipment must be disposed of in accordance with all current demolition laws.
The materials used in the manufacturing of this equipment do not pose contact or exposure hazards to humans or
animals.
31/01/2011 - 97050183-03-GB - 13
Publicité
