Publicité
Les langues disponibles
Les langues disponibles
DIRECT CONTROL MOVEMENTS
Chair raise/lowering - Backrest recline/return
MEMORISING CHAIR WORKING POSITIONS
The chair can memorise positions set by the use, including rinsing, reset and 4 working positions.
- Use the movement controls (3, 4, 5, 6 – fig. 10 and 11) to take the chair to the desired position;
MEMORISED POSITION RECALL
Warning: before recalling a position make sure that the Assistant's Table will not interfere with movement
of backrest.
WORKING POSITIONS
RESETTING
RINSING
Pressing any chair control button will stop the automatic movement in progress.
Note: The memorised rinsing, reset and working positions can be recalled via the foot control
commands (see the "Foot control commands" chapter)
All manuals and user guides at all-guides.com
CHAIR MOVEMENTS
The movement commands activate movements for raising and lowering the chair, as
well as reclining and raising the backrest. These movements continue for as long as the
button is pressed (LED on) and will stop as soon as the button is released
(LED off)
Press the control (9 – fig. 10 and 11) and keep it pressed for at least 1 sec.
(the control LED will flash)
Press the control you wish to associate to the chair position
(3, 4, 5, 6, 7, 8 – fig. 10 and 11).
Once memorisation has taken place the pushbutton LED (9) will go off.
Press the Programme/STOP button (9) (button LED on).
One second after pressing Programme/Stop, press the button associated with the
required position (LED on). The chair will move into the memorised position (at the end
of this movement the two LEDs will switch off).
The Reset button (7) recalls the memorised position (should the operating lamp be on,
it will automatically turn off).
This position makes patient access easier.
Press the Rinse button (7) (button LED on). This function will activate the backrest
movement alone. The movement stops when the memorised position is reached (the
LED stays on).
Press button (7) once again. The backrest will return to the position prior to the rinsing
movement (the LED turns off when the starting position is reached).
31/01/2011 - 97050183-03-GB - 23
Publicité
