Publicité
Les langues disponibles
Les langues disponibles
ELECTRICAL CIRCUIT DIAGRAM, LIST OF COMPONENT PARTS, CALIBRATION INSTRUCTIONS
Castellini S.p.A. offers to supply, upon request, circuit diagrams, component part lists, calibration instructions or other
information useful for Castellini authorised technical personnel in possession of valid licenses for intervention on
equipment parts that can be repaired directly at the practice.
Castellini S.p.A. reserves the right to alter its policies at any time without prior notice.
ENVIRONMENTAL CONDITIONS NECESSARY FOR TRANSPORT AND STORAGE
CASTELLINI DENTAL UNIT CONFORMITY TO IEC 60601-1-2:2001
This dental equipment is suitable for use in specific electromagnetic environments. The buyer/user of this
dental equipment must ensure that said equipment is used in electromagnetic environments as specified
below:
Emission test
RF emission
Irradiated and
conducted
CISPR 11
Harmonic emissions
Voltage variations /
Flicker emissions
IEC 61000-3-3
All manuals and user guides at all-guides.com
- Ambient temperature between -20 and +70 °C;
- Relative humidity from 10 to 100%;
- Atmospheric pressure from 500 to 1060 hPa (500 ÷ 1060 mbar).
Annex A
Conformity
Class B
Group 1
Conform
Conform
Electromagnetic environment
This dental equipment is suitable for use in residential
buildings connected directly to a low voltage electrical
network for domestic use.
This dental equipment only uses RF energy for its
internal operation
Therefore, its RF emission is extremely low and does not
cause interference with other electronic equipment
located within in its proximity.
This dental equipment is suitable for use in buildings
connected directly to a low voltage public electrical
network.
This dental equipment is suitable for use in buildings
connected directly to an electrical network.
31/01/2011 - 97050183-03-GB - 10
Publicité
