Technical Data; The Rail System; Dimensions For Different Track Installations - Invacare EC-Track Robin Manuel De Maintenance

4 Technical data

4.1 The rail system

All rail profiles are manufactured in extruded aluminium.
The rails are available with white powder coating.
The rails are available in three different heights; S= 68 mm, M=114 mm
and L=183 mm, providing a fee span of 2 m, 4 m and 8 m, respectively.
The profile width of all three profiles is 58 mm. The top of the profiles
are shaped to permit the coupling of the rails to the installation
brackets.
On delivery, the rail for the hoist will feature a milled groove on its
bottom. This groove is used for hoist installation and is called keyhole.
Possible installations
Single rail can be installed on the ceiling or onto the wall and floor.
The rail position in the room can be either parallel to a wall or angular
in relation to a wall.
The traverse system can be installed on the ceiling or onto the
wall and floor. The free span between the two parallel rails can be
up to 8000 mm.
Curves are available in the S-profile and can be installed on the
ceiling. They are available in angles of 30°, 45°, 60° and 90°.
Special solutions
Installation with pendling brackets is used in the following cases:
When the height of the ceiling varies in the lengthwise direction of
the rail, or when the rail is to be countersunk.
Angular installation is used when the rail has to be installed in
other angles than 90°.
4.2 Dimensions for different track
installations
The building dimensions of an installation is defined as the distance
between the ceiling underside and the hooks of the hoist.
Single rail height
For the EC-Track™ system and Robin™ ceiling hoist, the dimensions
for being built-in, measured from the ceiling with the rail mounted as
close as possible to the ceiling, are:
1586749-B
Robin™
K Measured from 336 mm
beneath the rail to
the sling hook
H
Ceiling mounted 410 mm
Rail profile S
Wall/floor 450 mm
mounted
Rail profile M
Wall/floor 519 mm
mounted
Rail profile L
Traverse rail system height
A = Between-hung traverse
B = Partly between-hung traverse
C = Under-hung traverse
Possible combinations
Traverse Parallel
rail rail
S-profile S-profile
M-profile S-profile
M-profile
L-profile S-profile
M-profile
L-profile
Technical data
Robin Mover™
396 mm
470 mm
510 mm
579 mm
A B
—
83 mm 156 mm
—
156 mm 203 mm
129 mm 203 mm 250 mm
— —
272 mm
— —
319 mm
198 mm 272 mm 388 mm
C
25