Invacare EC-Track Robin Manuel De Maintenance page 11

•
Ø6,3x22 mm thread forming screw (e.g. Bufab/Swebolt R6B or equal), 10 mm from each end of the rail, 18 mm from the
rail underside.
Trolleys
Type
Hoist Trolley
Traverse Trolley
Room-To-Room Trolley
Rail End Plugs
Type
Rail end plug S, M, L
Pendles
Type
Pendles, adjustable
1586749-B
Description
The hoist trolley is used for
individual mono rail systems as
well as traverse systems. The
hoist trolley is used when a
Robin™ ceiling hoist is to be
mounted in the track system.
The traverse trolley is used when
mounting a traverse system. For
a traverse system, 2 traverse
trolleys are always used.
The room-to-room trolley is used
when a transfer from one room
to another is required, typically
through a doorway.
Description
Rail end plugs are supplied for rail
profiles of 3 sizes. Color: white.
To be used at the closure of both
ends of all rails.
Mounting: Press into the rail
profile after the rail system is
mounted.
Description
Pendles are applied if there is a
need for installing a lower rail
system than the original ceiling
level. Can be used in hidden
installation as well as visible
installations.
Sizes (adjustable length):
•
200 – 300 mm
•
280 – 460 mm
•
440 – 740 mm
Rail system
Info
Info
Info
Installation: See 3.2.2 Concrete
Ceiling with Suspended Ceiling,
page 14.
11