Invacare EC-Track Robin Manuel De Maintenance page 9

Type
Standard ceiling bracket with lock
Shims
Type
Shim for standard ceiling bracket
Wall brackets
Type
Wall bracket, end hung
Wall brackets, side hung
Wall bracket, side and end hung
Insert tubes
Type
Insert tube for rail profile M or L
1586749-B
Description
•
120x146x14 mm (for rail
coupling)
Ceiling bracket with lock screw
measuring (70x146). Used for
ceiling installation, with min. 1
per straight rail. This ensures
that the rail is not displaced after
installation.
Sizes (WxDxH):
•
70x146x14 mm
Description
Available for ceiling brackets in
30, 70, 120 mm width.
Height:
•
1 mm
•
3 mm
•
5 mm
Description
To be used when installing tracks
to a wall. They can be used when
the walls have sufficiently high
carrying capacity when mounting
straight and diagonally to a wall.
To be used with insert tubes and
console.
To be used when installing tracks
side hung. Can be applied if the
wall has sufficient strength.
To be used when installing tracks
either side or end hung. Can be
applied if the wall has sufficient
strength.
Description
To be used when mounting rail
end hung to wall, when coupling
two rails, or when mounting rails
diagonally in a room.
•
Insert tube for rail profile M:
Length 800 mm.
•
Insert tube for rail profile L:
Length 1 m.
Rail system
Info
Info
Shims are to be used in
installations to compensate
possible differences of the height
in the roof/ceiling structure.
Info
Installation: See chapter 3.3 Wall
installation – end hung rail, page
16.
Installation: See chapter 3.4 Wall
installation – side hung bracket or
side/end hung bracket, page 17
Installation: See chapter 3.4 Wall
installation – side hung bracket or
side/end hung bracket, page 17
Info
Insert tube is supplied depending
on the particular mounting
situation.
9