Invacare EC-Track Robin Manuel De Maintenance page 12

Invacare®EC-Track™
Track Switch
Type
Track switch, manual
Transit Coupling
Type
Transit coupling
Lock fixture for traverse profile S
Lock fixture for traverse profile
M/L
Positioning fixtures for parallel
rail S-profile
Positioning fixtures for parallel
rail M/L-profile
12
Description
The track switch is manually
operated and is installed with
a standard ceiling bracket.
The track switch is used in
combination with a ceiling
installed single rail system with
S-profile, where a change in
direction is required during
movement of the patient.
Description
The transit coupling is operated
electrically and mounted with
pendles in the ceiling on both
sides of the wall. Length: 800 mm.
The coupling is used for
movement of a patient from
one room to another.
•
in traverse systems with S-,
M,- and L-rails.
•
in a single rail system with
only S-profile rails.
To be mounted on the traverse
profile in the end that is coupled.
It is mounted to ensure that the
traverse rail and coupling are
locked and connected correctly
before room transfer can be
done.
To be mounted on the traverse
profile in the end that is coupled.
It is mounted to ensure that the
traverse rail and coupling are
locked and connected correctly
before room transfer can be
carried out.
To be mounted on the parallel rail,
close to the coupling, to position
the traverse rail correctly in
proportion to the coupling.
To be mounted on the parallel rail,
close to the coupling, to position
the traverse rail correctly in
proportion to the coupling.
Info
Installation: See chapter 3.9
Installation of track switches, page
20
Info
Control button (for the wall), and
a transformer are enclosed when
delivered.
Installation: See chapter 3.6 Rail
coupling, page 18
1586749-B