Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
SYSTem:COMMunicate:LAN:TELNet:PROMpt "<string>"
SYSTem:COMMunicate:LAN:TELNet:PROMpt?
Sets the command prompt seen when communicating with the instrument via Telnet.
String of up to 15 characters
Default is Instrument Model Number: 34460A>, 34461A>, 34465A>, or
34470A>
Set the command prompt:
SYST:COMM:LAN:TELN:PROM "Command>"
On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l
The instrument uses LAN port 5024 for SCPI Telnet sessions and port 5025 for SCPI Socket sessions.
l
Telnet sessions are typically started from a host computer shell:
l
telnet <IP_address> <port>
For example:
telnet 169.254.4.10 5024
To exit a Telnet session, press <Ctrl-D>.
This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
l
ment Preset (SYSTem:PRESet).
SYSTem:SECurity:IMMediate
l
414
Parameter
sets this parameter to its default value.
Keysight Truevolt Series Operating and Service Guide
Typical Return
"Command>"
Publicité
