Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
Folder and file formats
Many MMEMory commands refer to folders and files. These have specific structures, described below.
Format for a <folder>
The format for <folder> is "[[<drive>:]<path>]", where <drive> can be INTernal or USB, and <path> is a
l
folder path, and <filespec> specifies a subset of files.
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
l
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with "\"
l
or "/" and start at the root folder of <drive>.
If <drive> is omitted, <path> is relative to the folder specified by MMEMory:CDIRectory. Relative
l
paths must NOT begin with \ or /.
Folder and file names cannot contain the following characters: \ / : * ? " < > |
l
The <folder> parameter cannot exceed 240 characters.
l
The specified folder must exist and cannot be marked as hidden or system. The exception is
l
MMEMory:MDIRectory, which creates a folder. For MMEMory:MDIRectory, all folder levels above the
new one must exist.
Format for a <file>
The format for a file name is "[[<drive>:]<path>]<file_name>", where <drive> can be INTernal or USB,
l
and <path>is a folder path.
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
l
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with "\"
l
or "/" and start at the root folder of <drive>.
If <drive> is omitted, <path> is relative to the folder specified by MMEMory:CDIRectory. Relative
l
paths must NOT begin with \ or /.
Folder and file names cannot contain the following characters: \ / : * ? " < > |
l
The combination of folder and file name cannot exceed 240 characters.
l
292
Keysight Truevolt Series Operating and Service Guide
Publicité
