Publicité
Les langues disponibles
Les langues disponibles
SYSTem:COMMunicate:LAN:SMASk "<mask>"
SYSTem:COMMunicate:LAN:SMASk? [{CURRent|STATic}]]
Assigns a subnet mask for the instrument to use in determining whether a client IP address is on the same
local subnet. When a client
Gateway. Contact your LAN administrator for details.
If you change this setting, you must send
activate the new setting.
Parameter
nnn.nnn.nnn.nnn
Command: "
Query: {CURRent|STATic}. Default: CURRent.
Set the subnet mask:
SYST:COMM:LAN:SMAS "255.255.255.0"
SYST:COMM:LAN:UPD
On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l
If DHCP is enabled
(SYSTem:COMMunicate:LAN:DHCP
l
However, if the DHCP server fails to assign a valid IP address, the instrument uses the Auto-IP subnet
mask.
A value of "0.0.0.0" or "255.255.255.255" indicates that subnetting is not being used.
l
SYSTem:SECurity:IMMediate
l
CURRent: returns address currently being used by the instrument.
l
STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or
l
unavailable.
This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
l
ment Preset (SYSTem:PRESet).
Keysight Truevolt Series Operating and Service Guide
IP address
is on a different subnet, all packets must be sent to the
". Default: "255.255.0.0".
sets this parameter to its default value.
SCPI Programming Reference
SYSTem:COMMunicate:LAN:UPDate
Typical Return
"255.255.255.0"
ON), the specified subnet mask is not used.
Default
to
413
Publicité
