Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
The following table lists the bit definitions for the Standard Operation Register:
Bit Num-
Bit Name
Decimal
ber
Value
0
Calibrating
1
Not Used
2
Not Used
3
Not Used
4
Measuring
5
Waiting for
Trigger
6
Not Used
Not Used
7
8
Configuration
Change
9
Memory
Threshold
10
Instrument
1024
Locked
Not Used
11
2048
12
Not Used
4096
13
Global Error
8192
Not Used
14
16384
15
Not Used
32768
Command Summary
STATus:OPERation:CONDition?
STATus:OPERation:ENABle
STATus:OPERation[:EVENt]?
STATus:PRESet
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle
STATus:QUEStionable[:EVENt]?
388
1
Instrument is performing a calibration.
2
(Reserved for future use)
4
(Reserved for future use)
8
(Reserved for future use)
16
Instrument is initiated, and is making or about to make a measurement.
32
Instrument is waiting for a trigger.
64
(Reserved for future use)
128
(Reserved for future use)
256
Instrument configuration has been changed since the last INIT, READ? or MEASure?, either from
the front panel or from SCPI.
512
Programmed number of measurements (DATA:POINts:EVENt:THReshold) have been stored in
measurement memory.
Set if a remote interface (GPIB, USB or LAN) has a lock (SYSTem:LOCK:REQuest?). Cleared when
the remote interface releases the lock (SYSTem:LOCK:RELease).
(Reserved for future use)
(Reserved for future use)
Set if any remote interface has an error in its error queue; cleared otherwise.
(Reserved for future use)
"0" is returned.
Definition
Keysight Truevolt Series Operating and Service Guide
Publicité
