Publicité
Les langues disponibles
Les langues disponibles
Features and Functions
Security
Security manages the secure code and security features. If you have the SEC option, you must enter the
Secure Code to configure some features.
NISPOM Sanitize sanitizes all user-accessible instrument memory except for the calibration constants
and reboots the instrument. This complies with requirements in chapter 8 of the National Industrial Secur-
ity Program Operating Manual (NISPOM).
The NISPOM Sanitize softkey and the SYSTem:SECurity:IMMEdiate command are
equivalent. They are for customers, such as military contractors, who must comply
with NISPOM.
This feature destroys all user-defined state information, measurement data, and
user-defined I/O settings such as the IP address. This feature is not recommended for
use in routine applications because of the possibility of unintended data loss.
Install License
Install License enables licensed instrument features. For information on obtaining licenses, go to
www.keysight.com/find/truevolt.
After receiving a license file from Keysight, use the following procedure to install the license:
1. Save the license file to a USB drive and connect the USB drive to the DMM's front panel USB connector.
2. Press [Shift] > [Utility] > Test/Admin > Install License.
3. Use the front panel arrow keys to navigate to the license file location and press Select.
4. Upon successful license installation, the DMM displays License Installation Successful.
Firmware Update
Firmware Update updates the instrument firmware to a new version. See
148
Firmware Update
Keysight Truevolt Series Operating and Service Guide
for details.
Publicité
