Keysight Truevolt Serie Mode D'emploi page 152

Features and Functions
Instrument Monitor and Control Page
This page allows you to monitor and control the DMM. This page opens in the Observe Only mode and
automatically opens the Monitor DMM window (described below). In Observe Only mode, the instrument
control settings are grayed out (disabled). This mode allows you to keep track of DMM operations
remotely. The About section shows installed licenses, the instrument firmware revision, and the instru-
ment serial number.
In Allow Full Control mode, this window configures the instrument and takes measurements. Simply
select the DMM settings and click Apply.
.
The six buttons along the top of the screen are described below.
Keysight Truevolt Series Operating and Service Guide 153