Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
DISPlay:TEXT:CLEar
Clears the text message from the display.
Parameter Typical Return
(none)
(none)
Clear displayed message:
DISP:TEXT:CLE
With
DISPlay
ON, DISP:TEXT:CLEar returns the display to its normal mode.
l
With
DISPlay
OFF, DISP:TEXT:CLEar clears the message and the display remains disabled. To enable
l
the display, send
DISPlay ON
The display text is unaffected by *RST. It is cleared at power-on.
l
DISPlay:VIEW {NUMeric|HISTogram|TCHart|METer}
DISPlay:VIEW?
Specifies whether measurement data is displayed in numeric, histogram, trend chart (not available on the
34460A), or bar meter form.
Parameter
{NUMeric|HISTogram|TCHart|METer}. Default: NUM. HIST
Display histogram:
DISP:VIEW HIST
The display is not turned on if the display state is OFF.
l
This parameter is set to its default value after a Factory Reset (*RST) or Instrument Preset
l
(SYSTem:PRESet).
260
or press the front panel [Local] key.
Typical Return
Keysight Truevolt Series Operating and Service Guide
Publicité
