Filling The Oil Reservoirs - Dürkopp Adler 271-140331 Instructions D'emploi

10. Lubrication
For filling the oil reservoirs use only ESSO SP-NK 10 lubricating oil or an equivalent oil
with following specification:
–
Viscosity at 40° C :
–
Flash point:
ESSO SP-NK 10 is available from DÜRKOPP ADLER AG unter sales offices
under the following parts no.s:
2-liter-container: 9047 000013
5-liter-container: 9047 000014

10.1 Filling the Oil Reservoirs

Lubrication of the machine head
–
Fill oil at the reservoir 1 up to the "max." mark.
Hook lubrication
–
Remove the knee lever.
–
Tilt the machine head back.
–
Fill oil at the reservoir 2 up to the "max." mark.
74
Caution Risk of Injury !
Oil can cause skin rashes.
Avoid longer skin contact.
After contact wash yourself thoroughly.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
constraints.
Deliver used oil to an authorized reception point.
Protect your environment.
Take care not to spill any oil.
2
10 mm /s
150 °C