Dürkopp Adler 271-140331 Instructions D'emploi page 144

7. Operating and Setting the Direct-current Positioning Drive
DC1500/DA220C . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 .Operating and Indicator Elements of the DA220C Controls . . . . .
7.1.1 Changing Parameter Values at the Operator Level in the
DA220C controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.1.1 Sequentially Calling up and Changing Parameters at the
Operator Level of the DA220C controls DA220C . . . . . . . . . .
7.1.1.2 Directly Calling Up and Changing Parameters at the
Operator Level in the DA220C controls . . . . . . . . . . . . . . . .
7.1.2 Reducing the Maximum Speed at the DA220C controls . . . . . . .
7.1.3 Parameter List for the Operator Level of the DA220C Controls
7.1.4 Changing Parameter Values at the "Technician Level" and the
"Supplier Level" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.5 Setting the Positions at the DA220C Controls . . . . . . . . . . . .
7.1.6 Setting Machine-specific Parameters at the DA220C controls . . .
7.1.6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.6.2 Autoselect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.6.3 Table of Machine-specific Parameters for the DA220C Controls . .
7.1.7 Master Reset at the DA220C Controls
7.1.8 Status and Error Messages
7.2 V810 Control Panel (Optional Equipment) . . . . . . . . . . . . . .
7.2.1 Operating and Indicator Elements at the V810 Control Panel . . . .
7.2.2 Functions of the Keys at the V 810 Control Panel . . . . . . . . . .
7.2.3 Meanings of the Symbols in the V810 Control Panel . . . . . . . . .
7.2.4 Changing Parameter Values in the Operator Level . . . . . . . . . .
7.2.5 Reducing the Maximum Speed
7.2.6 Changing the Parameter values in the " Technician Level "
and in the "Supplier Level" with the V810 Control Panel . . . . . . .
7.2.7 Setting the Positions with the V810 Control Panel . . . . . . . . . .
7.2.8 Setting Machine-specific Parameters with the V810 Control Panel .
7.2.9 Master Reset with the V810 Control Panel . . . . . . . . . . . . . .
7.2.10 Status and Error Messages in the V810 Control Panel
7.3 V820 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3.1 Operating and Indicator Elements in the V820 Control Panel . . . .
7.3.2 Functions of the Keys in the V820 Control Panel . . . . . . . . . . .
7.3.3 Meaning of the Symbols in the V820 Control Panel . . . . . . . . .
7.3.4 Changing Parameter Values in the Operator Level . . . . . . . . . .
7.3.5 Reducing the Maximum Speed
7.3.6 Quick Information and Quick Entry of Setting Values (HIT . . . . . .
7.3.7 Changing Parameter Values in the "Technician Level "
and the "Supplier Level" with the V820 Control Panel . . . . . . . .
7.3.8 Setting the Positions with the V820 control panel . . . . . . . . . .
7.3.9 Setting Machine-specific Parameters with the V820 Control Panel .
7.3.10 Master Reset with the V820 Control Panel . . . . . . . . . . . . . .
7.3.11 Status and Error Messages in the V820 Control Panel
7.3.12 Seam Programming with the V820 Control Panel . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
23
24
25
25
26
26
. . 27
28
29
31
31
31
31
32
33
34
34
34
35
36
36
37
38
39
39
. . . . . . . 39
40
40
40
42
43
43
43
44
45
46
46
. . . . . . . 47
47