Publicité
Les langues disponibles
Les langues disponibles
Exhaust Fan
1. Disconnect the ground wire at the rear of the fan motor.
2. Disconnect the white and black power wires at the front of the fan motor.
3. Lift and remove the black tubing fro m the brown rubber elbow on the
intake of the fan.
4. Remove the mounting screw securing the fan assembly to the coffee maker
mainframe. The screw is located in the upper center of the exhaust fan.
5. Grasp the top front of the fan assembly and pull it slightly towards the rear
on the coffee maker.
6. Once the assembly snaps loose, remove it fro m the base.
7. Insert the new fan into the base and press down until it snaps in place.
8. Carefully install the mounting screw to secure the fan to the mainframe.
9. Connect the power wires to the front of the fan.
10. Connect the ground wire to the rear of the fan.
Replacing Major Components
59
Publicité
