Publicité
Les langues disponibles
Les langues disponibles
Empty the Drip Tray
The drip tray on the front of the
coffee maker holds approximately
500ml (1.7 oz) of liquid. When too
much liquid has accumulated inside
the tray, a float will rise and
protrude through the drip tray grill.
At this point, the drip tray must be
emptied.
To empty the drip tray :
1. Grasp the outer sides of the drip tray.
2. Pull the drip tray out towards you.
3. Empty the contents of the tray, and clean it under running water.
4. Remove the waste bin.
5. If required, use a sponge or absorbent paper towel to clean any liquids
fro m the area beneath where the waste bin is installed (base).
6. Re-install the waste bin and re-install the drip tray by sliding it back
into position until it locks in p lace.
NOTE:
With the drip tray removed, the serial number decal can be viewed.
This decal also shows the electri c al speci f ications of the equipment, as well as
the equipment certifi c ation (CSA, UL, etc.).
Maintenance
25
Publicité
