Publicité
Les langues disponibles
Les langues disponibles
Whipper Motor
1. Disconnect the wiring to the whipper motor.
2. Remove the whipper chamber.
3. Remove the whipper b lade.
4. Remove the whipper base by rotating it until it unlocks fro m the location
pillars (stand-offs).
5. Remove the two support screws securing the whipper motor to the wh ipper
support and remove the motor.
NOTE:
pillars (stand-offs) w ill also come off. Set these aside with the two
screws.
6. Insert the new motor into the whipper support.
7. Install the two support screws (including the location pillars) to secure the
whipper motor to the wh ipper support.
8. Replace the whipper base by rotating it onto the location pillars until it
locks in position.
9. Replace the whipper blade and wh ipper chamber.
10. Connect the wiring to the whipper motor.
Replacing Major Components
When the screws for the motor are removed, the location
57
Publicité
