Publicité
Les langues disponibles
Les langues disponibles
Drain Installation
8. Connect the drain hose to the drain fitting under the front of the machine.
The hose must go straight down – do not route the hose underneath the
mach ine.
9. Secure the drain hose to the fitting with the plastic clamp.
10. Connect the other end of the hose to the drain system that will be used at
the installation location.
11. Connect the programmer and power up the machine.
12. Scroll to the "
button on the machine.
13. Press the "+" button on the programmer – the lower line on the display
should read "
This lets the software know that a drain is installed, reducing user
interaction with the equipment during an "
CLEANING
14. Press the "
14
Drain Fitting
Drain Hose
DRAIN INSTALLED
".
YES
/
SANITIZING CYCLE
" button to save the setting.
SCRO LL UP
Plastic Clamp
?" menu and press the green <
-
IN
PLACE
", should this cycle ever be required.
>
START
Publicité
