Keysight Technologies 3458A Guide D'utilisation page 67

User-defined keys
You can assign a string of one or more commands to each of the USER keys
labeled f0 - f9. After assigning a string to one of these keys (maximum string
length is 40 characters), pressing that key displays the string on the display. You
can then execute the string by pressing the Enter key. The Def key allows you to
assign a command string to any of the user-defined keys. For example, to assign
the commands NRDGS 10,AUTO; TRIG SGL (the semicolon links multiple
commands) to the user-defined key f0, press:
The display shows:
You can now enter the command string by pressing:
N Rgds/
Trig
To store the string (this does not execute the string, it merely assigns it to the
user-defined key), press:
Enter
To access and execute the string assigned to key f0, press:
The multimeter will take 10 readings and then stop.
As a special keyboard feature, you can access the string assigned to a key without
pressing the shift key (except when you are in the process of entering a
Keysight 3458A User's Guide
Def key
0
°
1 0
R
Trig
Enter
0
Getting Started
67
2