Keysight Technologies 3458A Guide D'utilisation page 341

SETACV
Set ACV. Selects the RMS conversion technique to be used for AC or AC+DC
voltage measurements.
Syntax
SETACV [type]
type
The type parameter is used to select the measurement method: analog, random
sampling, or synchronous sampling. The parameters are:
type
parameter
ANA
RNDM
SYNC
Power-on type = ANA.
Default type = ANA.
Remarks
– Bandwidth limitations vary with the conversion technique selected. See the
– Query command: The SETACV? query command returns the present AC
– Related commands: ACBAND, ACDCV, ACV, FUNC, SSRC
Example
10 OUTPUT 722; "SETACV SYNC" !SPECIFIES SYNCHRONOUS SAMPLING (DC
COUPLED)
20 OUTPUT 722;"ACDCV" !SELECTS AC+DC VOLTAGE MEASUREMENTS
30 END
Keysight 3458A User's Guide
Numeric
query equiv.
1
2
3
"Appendix A: Specifications"
measurement method. Refer to
for more information.
Description
Analog RMS conversion
Random sampling conversion
Synchronous sampling conversion
on page 409 for details.
Query commands
Command Reference
near the front of this chapter
6
341