Keysight Technologies 3458A Guide D'utilisation page 291

– Use the MFORMAT command to specify the memory format (SINT, DINT, ASCII,
– Executing the RMEM command sets reading memory to OFF. You must
– Query command: The MEM? query command returns the present memory
– Related commands: MCOUNT?, MFORMAT, MSIZE, RMEM
Example
OUTPUT 722;"MEM FIFO" !ENABLES READING MEMORY, FIFO MODE
MENU
The MENU command selects the SHORT or FULL list of commands in the front
panel's alphabetic command menu.
Syntax
MENU [mode]
mode
The mode parameter choices are:
mode
parameter
SHORT
FULL
Power-on mode = mode selected when power was removed.
Default mode = FULL
Keysight 3458A User's Guide
SREAL, or DREAL).
execute MEM CONT, MEM FIFO, or MEM LIFO to re-enable reading memory
after executing RMEM.
mode. Refer to Query commands
information.
Numeric
query equiv.
0
1
near the front of this chapter for more
Description
Selects the short command menu
Selects the full command menu
Command Reference 6
291