Keysight Technologies 3458A Guide D'utilisation page 47

Table 2-1
Command
INBUF OFF
LEVEL 0, AC
LFILTER OFF
LFREQ 50 or 60
LOCK OFF
MATH OFF
MEM OFF
MFORMAT SREAL
MMATH OFF
NDIG 7
NPLC 10
NRDGS 1, AUTO
OCOMP OFF
OFORMAT ASCII
QFORMAT NORM
RATIO OFF
RQS 0 (or 8)
SETACV ANA
SLOPE POS
SSRC LEVEL, AUTO
SWEEP lOOE-9,1024
TARM AUTO
TBUFF OFF
TIMER 1
Keysight 3458A User's Guide
Power-on state (continued)
Description
Disable input buffer
Level trigger at 0%, AC-coupled
Level filter disabled
Measured line frequency rounded to 50 or 60 Hz
Keyboard enabled
Disable real-time math
Disable reading memory (last memory operation = FIFO)
Single real reading memory format
Disable post-process math
Display 7.5 digits
10 power line cycles of integration time
1 reading per trigger, auto sample event
Disable offset compensated resistance
ASCII output format
Normal query format
Disable ratio measurements
0 disables status register conditions (if power-on SRQ was on when power
was removed, value = 8).
Analog AC voltage mode
Positive slope for level triggering
Level sync source event, auto synchronous AC voltage
Sample interval 100 nanoseconds, 1024 samples
Auto trigger arm event
Disable external trigger buffering
1 second timer interval
Getting Started
47
2