Keysight Technologies 3458A Guide D'utilisation page 225

Command Reference 6
The commands in this chapter are described using the following format:
Command header
Command description
Syntax statement
shows the command format and its
parameters. parameters shown in
brackets ([]) are optional (have
default values). parameters shown
without brackets have no default
values and must be specified.
Parameter description
describes the parameter and shows
the choices or ranges available.
Power-on value
shows the parameter used when
power is applied.
Defaul t value
shows the parameter used if you
execute the command but do not
specify a parameter.
Remarks
contains special information about
the command.
Examples
show typical BASIC language
programs or statements
(multimeter at address 722).
Program syntax is applicable to
HP Series 200/300 Computers.
Keysight 3458A User's Guide 225