Keysight Technologies 3458A Guide D'utilisation page 117

Recalling states
The RSTATE command recalls a state from memory and configures the multimeter
to the recalled state. For example, to recall state ACSTl send:
OUTPUT 722;"RSTATE ACST1"
From the front panel, you can view all stored state names by accessing the
RSTATE command and pressing the up or down arrow key. Once you have found
the correct state, press Enter to recall the state.
Deleting states
You can delete a single stored state using the PURGE command. For example, to
purge the state ACST1, send:
OUTPUT 722;"PURGE ACST1"
You can also use the SCRATCH command to delete all stored states and all
subprograms from memory.
Keysight 3458A User's Guide
Configuring for Measurements 3
117